OneUp Switch Carrier Shimano

Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler.

Chain Ring Sold Separate

• Cheaper Replacement Cost:Replacement rings are a fraction of the cost of a complete direct mount chainring
• Quick Change:Replace your ring in less than an minute, using only a 4mm hexkey. Tailor your gearing to the terrain that you’re riding
• Enduro World Series Champion WinningNarrow Wide tooth profile keeps your chain in place on the roughest terrain
• 4Ring Sizes (28, 30, 32, 34T)
• 2 Profiles: both Round and Oval
• 12 speedring designed to work with all 8, 9, 10, 11, and both Shimano Hypergilde+12 and SRAM Eagle 12 speed chains.
• Get ultimate traction withOval rings by smoothing out the torque you deliver to your rear tire

Specs:

Material:7075-T6

Weight:69g (30T Oval)

Chainline:Standard is controlled by the crank.

Compatibility:Shimanodirect mountXTR M9100, XT M8100, SLX M7100,Deore M6100 seriescranks.

Colour:Black

Oval Rings:

• 12% ovality (32T is equal to a 30T-34T range)
• 115 clocking from crank arm puts the major axis in your power stroke

Installation:Align the small bumpon the edge of the carrierwith your crank arm. Install ring onto carrier and tighten bolts to 8Nm.All 4 bolts need to be backed off / tightened to Switch rings (anti-clockwise is tightening from the outside / on bike position). Use some grease on the Switch bolts and tightening with a wrench FULLY ENGAGED in the bolt.